>
SNAIL

Snail is specifically formulated for the welding of Kavalan products.

While Kavalan’s weldable solutions, Sunlight Weldable and Butterfly Weldable, deliver perfect adhesion, Snail tape is the perfect companion for all other large-format printing materials in the KAVALAN range. PVC-free of course, Snail tape is so easy to use, boasts outstanding adhesive strength, and is perfect for high frequency (HF) and hot wedge (HW) welding.

Item No.
Case Studies
Item No.

Snail is specifically formulated for the welding of Kavalan products.

Snail Tape - ST25
WELDING TAPE
  
Snail Tape - ST50
WELDING TAPE
  
SNAIL
Case Studies
Snail Tape - ST25
WELDING TAPE

Would you like more information, or do you have any questions about our products?

 

You can contact our sales team by calling +86-2164632409 or sending an e-mail to info@goforkavalan.com

PROPERTIES
MANUAL
Regular Width
2.5 m
Roll Length
100 m/r
 
MOQ
20 Rolls 
Thickness
0.15 mm
Please take note of the welding settings for temperature, pressure and time. It is recommended that welding temperatures are set between 140°C and 150°C.
1. When the welding temperature is below this range, the material may not fully melt and the quality of the bond may be poor.
2. When the welding temperature is above this range, the penetration of the melted tape may be too deep and its viscosity would decrease.
Storage conditions to achieve a shelf life of at least 2 years, should be:
1. Avoid direct sunlight and store in a cool and dry place.
2. The ideal storage temperature should be in the range of 10℃ to 20℃.
3. Keep away from naked flames and humid areas.
Snail Tape - ST50
WELDING TAPE

Would you like more information, or do you have any questions about our products?

 

You can contact our sales team by calling +86-2164632409 or sending an e-mail to info@goforkavalan.com

PROPERTIES
MANUAL
Regular Width
5.0 cm
Roll Length
100 m/r
 
MOQ
10 Rolls
Thickness
0.15 mm
Please take note of the welding settings for temperature, pressure and time. It is recommended that welding temperatures are set between 140°C and 150°C.
1. When the welding temperature is below this range, the material may not fully melt and the quality of the bond may be poor.
2. When the welding temperature is above this range, the penetration of the melted tape may be too deep and its viscosity would decrease.
Storage conditions to achieve a shelf life of at least 2 years, should be:
1. Avoid direct sunlight and store in a cool and dry place.
2. The ideal storage temperature should be in the range of 10℃ to 20℃.
3. Keep away from naked flames and humid areas.